- Main page
- Production
- Cable for Oil submersible pumps
- KPvOppBP-130, KPvOppBkP-130
cost of production.
To place an order
fill out the application
or call
8 (800) 555-73-14
| LME.Copper | 14157.00 |
| LME.Aluminium | 3266.00 |
| Currency | Value | Edit | |
| USD CB RF | 85.1645 | 0.1509 | |
| EUR CB RF | 98.7312 | 0.3960 |
KPvOppBP-130, KPvOppBkP-130
Download catalogue
CONSTRUCTION:
1. Electrical conductor is a copper solid conductor.
2. Insulation is two-layer radiation-modified polyethylene.
3. Common sheath is made of propylene-ethylene block copolymer and applied with the interphase space being filled.
4. Bedding is made of non-woven fabric tape.
5. Armor is made of galvanized (B) or stainless steel (Bk) tape.
Make a request
The cables are designed to supply electric power to motors of oil production units at the rated voltage of 3.3 and 4.0 kV with a frequency of up to 70 Hz.
The cables have higher operational reliability due to the reduced compression effect on the middle conductor.
The cables are used in wells at the average temperature of pumped fluid and with the average content of corrosive substances.
Cables are available in a flat design.
|
Cable type |
Nominal voltage, kV |
Number and nominal conductor section, mm |
Estimated cable weight 1 km, kg |
Outer cable dimensions, mm, not more |
|
KPvOppBP-130, KPvOppBkP-130 |
3,3 |
3 x 10 |
788 |
13,6 х 31,4 |
|
3 x 13,3 |
924 |
15,0 х 33,6 |
||
|
3 x 16 |
1023 |
15,0 х 34,8 |
||
|
3 х 21,15 |
1210 |
16,2 х 36,9 |
||
|
3 х 25 |
1349 |
16,2 х 38,3 |
||
|
3 х 35 |
1652 |
17,7 х 41,1 |
||
|
4 |
3 x 10 |
857 |
15,3 х 33,8 |
|
|
3 x 13,3 |
994 |
16,0 х 36,0 |
||
|
3 x 16 |
1094 |
16,4 х 37,2 |
||
|
3 х 21,15 |
1284 |
17,1 х 39,3 |
||
|
3 х 25 |
1425 |
17,6 х 40,7 |
||
|
3 х 35 |
1733 |
18,5 х 43,5 |
Make a request